Cut Edge Corrosion In Feltham Middlesex Treatment

Cut Edge Corrosion Treatment in Feltham Middlesex - IRM Roofing

IRM Industrial Roofing in Walsall was tasked to carry out industrial roof gutter cleaning and cut edge corrosion treatment in Feltham Middlesex for IEC Europe.

The cut edge corrosion treatment in Middlesex was carried out over a 30 metre by 20 metre industrial roof as a part of a dilapidation programme, and took a small team of our Walsall cut edge corrosion experts one week to complete.

Acrypol Metal Kote roof coating was used for the cut edge corrosion treatment, with preparation using grinders, application of sealant to the lap joint, application of base coats and then following drying, application of the top coats.

As always safety whilst working on the industrial roof tops was paramount, with our cut edge corrosion experts in Middlesex wearing a harness and lanyard attached to existing safety lines.

Below are photos from the job. If you require cut edge corrosion treatment then please contact IRM Industrial Roofing in Walsall. We serve commercial customers all over the UK.

Enquire And Contact IRM Roofing
Plastisol coating peeling away from the industrial roof

View of the plastisol coating peeling away from the industrial roof, leaving bare metal to rust.

Cut edge finished off with a grinder

Part of the preparation process where the cut edge has been finished off with a grinder.

Butyl mastic applied to the cut edge

Butyl mastic applied to the cut edge before the base coat is applied to the industrial roof.

Acrypol Metal Kote base coat

Close up of the Acrypol Metal Kote base coat being applied to the cut edge corrosion.

Lap joint completed over the 30 meter long roof

Shows the lap joint completed over the 30 meter long roof. The brown panels are GRP Sky Lights.

Butyl sealant and base coat

Close up image of the application of butyl sealant and base coat to the industrial roof in Feltham.

Acrypol Metal Kote cut edge corrosion treatment in Middlesex

Acrypol Metal Kote cut edge corrosion treatment in Middlesex chosen by the client.

IRM roofing expert wearing a safety harness

An IRM roofing expert wearing a safety harness, marking a line prior to applying finishing top coat.

Completed cut edge corrosion treatment

A close up of the completed cut edge corrosion treatment after application of 2 coats of Metal Kote.

Industrial roof gutter before being cleaned

Industrial roof gutter before being cleaned out by our Walsall industrial roofing gutter specialists.

Gutter can become porous if it is not treated

This images shows a close up of the gutter, which can become porous if it is not treated.

Bitumen applied to gutter

Gutter after being cleaned out and a coating of bitumen applied by our industrial roofing experts.