IRM Roofing carrying out Plygene gutter repairs in Stafford

Plygene Gutter Repairs In Stafford - IRM Roofing

IRM Roofing were contracted to carry out industrial gutter repairs in Stafford at a Ministry of Defence site on behalf of Lawlors Construction. The industrial gutter repairs were part of a full refurbishment of four hangers, with Plygene Gutterline being used to reline the gutters, providing a twenty year warranty.

Overall there were four valley gutters to reline, each measuring 60 linear metres. The total combined length of the four gutters measured 240 linear metres, and the Plygene gutter repairs in Stafford were completed over a two week period, using a specialist four man team of our Walsall Plygene Gutterline approved installers.

Below are photos of the Stafford gutter repairs. For more information or enquiries on Plygene gutter repairs in Stafford, Birmingham and the West Midlands, please contact us at Industrial Roofing in Walsall.

Enquire And Contact IRM Roofing
Our Plygene installers gained access to the 6m high roof via a haki tower

Our Plygene Gutterline approved installers in Stafford gained access to the 6m high roof via a haki tower.

Heat welding the Plygene stop end using a heat gun and seam roller

One of our specialist HD Sharman trained operatives heat welding the Plygene stop end using a heat gun and seam roller.

Plygene stop end and outlet welded into position

A Plygene stop end and outlet welded into position during works at the industrial gutter repairs in Stafford.

Plygene liner laid in the 60 linear metre valley gutter

The Plygene liner was laid into the gutter and the retaining angles were also laid out ready to be fitted.

Plygene outlet components laid ready for welding in position with safety rail installed at each valley gutter end

Plygene outlet components laid ready for welding in position with safety rail installed at each valley gutter end.

One of our Plygene installers in Stafford welding a gutter outlet in position

One of our Plygene installers in Stafford welding a gutter outlet in position. The metal strips retain the Plygene in position.

Plygene installer using a heat gun and seam roller

A wider view of our Walsall Plygene installer using a heat gun and seam roller to aid positioning the gutter outlet.

Finished welding the gutter outlet into position

Our Plygene installer sits back to check his work once he has finished welding the gutter outlet into position.

Close up view of a Plygene gutter outlet welded into position

This is a close up view of a Plygene gutter outlet welded into position during the industrial gutter repairs in Stafford.

60 linear metre valley gutters with Plygene in Stafford

A view along one of the four 60 linear metre valley gutters with Plygene Gutterline installed in Stafford.