Industrial Roofing in Walsall carried out various works including industrial roof washdown, rooflight replacement, giromax cut edge corrosion and industrial roofing re-paint, on behalf of Sandvik Saxon in Rugby.
We were initially contracted to undertake an industrial roof wash down, together with rooflight replacement and giromax cut edge corrosion. The end of lease dilapidation work was to be completed in preparation to offer a new tenant a ten year lease.
After the industrial roof wash down was completed (a two week job) it became apparent that the entire roof plastisol coating was degraded so much that the roof then needed re-coating with paint. A scope was put forward to carry the work out using “Metal Kote” - which is a Acrypol product - using our state of the art Graco 7900 High Pressure Ailess Sprayer.
Because the re-paint was not planned, budget was a major consideration. The Metal Kote was to be applied quickly through spraying, and is a one coat solution to failing roof coatings (Acrypol has different applications for various roof types). A slightly bigger team was dispatched from our base Industrial Roofing in Walsall to carry out the industrial roofing works in Rugby.
Below are photos from all stages of the project which included the washdown, rooflight replacement, giromax cut edge corrosion and industrial roofing re-paint in Rugby. If you require industrial roofing works then look no further than Industrial Roofing in Walsall. Please contact us to enquire. We serve commercial customers all over the UK.Click Here To Enquire And Contact IRM Roofing
The roof part cleaned using a high pressure washer.
An IRM team member washing down the roof using the high pressure washer. He is aware not to stand on the rooflight behind, but as a safety precaution there are safety nets underneath.
A view of the half washed / half still dirty Rugby roof, with the high pressure deisel generator, which was fork lifted onto the roof.
Another view of the industrial roof washdown in progress, with water browser in shot.
After cleaning has taken place, the cut edge corrosion in Rugby was prepared ready for the Giromax Seamsil 100 application.
Our Giromax experts in Rugby applying the Giromax Seamsil 100 base coat.
Giromax Seamsil 100 being applied in the foreground, with the Walsall industrial roofing washdown being carried out towards the rear of the 70 metres long roof.
The grey line is the completed Giromax Seamsil cut edge corrosion works, carried out on the 15 year old building. The machine is a leaf blower which helps to dry the roof.
A close up of our state of the art Graco 7900 High Pressure Ailess Sprayer.
An IRM team member wearing protective clothing whilst painting the Rugby roof. We applied the Metal Kote in one coat using the Graco 7900.
The silicon based Giromax was not compatible with the Metal Kote, so we had to be careful not to overspray the Giromax product. We used masking profile plates to allow us to spray up to the giromax work.
The Metal Kote is a one coat application and carries a 10 year guarantee.
Our IRM industrial roof painting experts in Rugby masking off the Giromax and rooflight edges to prevent overspray.
Almost complete, the guys leave a track (pathway) back to the haki tower roof exit.
View of the completed works, showing the Giromax (grey line) and Metal Kote.
Another finished view. To enquire about industrial roof washdowns, Giromax application or industrial roof re-painting please contact us.